Before & After Photos

Our technicians sealed the concrete sorrounding this pool with our NexusPro sealant in order to keep water and debris away from the gaps. This is especially important near poolsides where chlorine based water can eat away between your slabs!

Whenever the owner of this home had to take the sidewalk to reach their walk out basement, they would often lose balance. The sidewalk and stairs had tilted away from the home, leaving them unlevel. They tilted away from the home because the soil on the hillside had washed down and away from the home over time. In order to make the stairs and sidewalk level again, we injected our polyurethane foam under the side that sunk down. Through this process, we were able to level everything out and seal all the gaps. The homeowner can now travel down the stairs safely again. 

When this sidewalk that surrounded the outside of this home in Union, KY, became uneven, the homeowner called us out to give a free quote to level the slabs out with our PolyLevel foam. The homeowner preferred our foam mixture compared to mudjacking alternatives, so they agreed to have us complete the job. 

This front porch and connected walkway had become separated from the soil shifting from under them. We were able to life the sidewalk with PolyLevel foam and seal them back together. 

The gap seen in the before picture between the 1st and 2nd step was an issue for this homeowner, and they wanted it fixed. You see, a gap like this usually means that there is some settling occurring under your concrete slabs. If the settling is too extreme and reaches a certain threshold, your slabs could crack from imbalanced support. The gap seen in the pictures can also invite rain water under your slabs, further accelerating the settling process.

We fixed all these problems by:

1. Leveling the slabs by raising parts with PolyLevel foam injections.

2. Sealing the gaps and cracks with our concrete sealant.