Before & After Photos

A homeowner in Black River Falls, WI, is worried that their uneven and sunken sidewalk is becoming a tripping hazard. Concerned that someone could be seriously injured, the homeowner began looking into "concrete sink refresh near me". One of the first companies to grab their attention was us, American Waterworks, so the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of their Design Specialist, Nate. A few weeks later, Nate traveled to the home to begin the thorough inspection of the concrete. During the inspection, Nate confirmed the walkway was sinking due to settlement. To prevent the settlement from continuing, Nate recommended securing PolyLevel below the sunken slabs. Knowing this was the best plan of action, the homeowner agreed and worked with Nate to find the best installation date. When the installation date arrived, our Foreman, Patrick, and his crew traveled to the home to begin the installation. First, Patrick and his crew started by securing PolyLevel below the walkway. Once the walkway was properly lifted, the crew shifted to filling voids below the garage floor. After all the areas were properly lifted, the crew cleaned up their matierals and left the home. The homeowner was delighted with the excellent work completed by the crew. If you notice your home is experiencing a similar issue, sign up for your FREE estimate today! 

Kathy M. of Boyd, WI had a sunken concrete stoop on her front porch, and she wanted to get it repaired rather than fully replaced. She saw an American Waterworks ad in her phone book, so she called our office line and set up a FREE Estimate. Our concrete Design Specialist went to her home, inspected her porch, and came up with the right solution to solve her problem. She was confident with the proposal, so she got an installation date scheduled. 

Our concrete Foreman and his crew member injected 64 pounds of our PolyLevel to raise the stoop about 3 inches. Our PolyLevel is a high-density foam that fills the voids underneath the concrete and stabilizes the surface. Our PolyLevel is the best of the best because it is not messy, it cures the concrete within 15 minutes after injected, it is adjustable for loads of all sizes, and it provides an accurate lift with clean results. Kathy was very happy and grateful we were able to help her! 

A homeowner in Holcombe, WI, disliked the appearance of their driveway. Knowing this project was bigger, the homeowner searched for a concrete repair company to assist them. After searching "concrete repair near me", one of the first companies to show up was us, American Waterworks. After seeing our five-star reviews, the homeowner took a closer look at our concrete services and was impressed. Quickly after, the homeowner called our Appointment Center and signed up for their FREE estimate. After the FREE estimate was set, the homeowner prepared for the arrival of Chuck, one of our Design Specialists. Chuck greeted the homeowner and began his inspection of the driveway. Following his detailed inspection, Chuck determined that the driveway was sinking into the ground. To save the sidewalk from sinking further, Chuck recommended lifting and leveling the sidewalk. Knowing this was their best option, the homeowner agreed and production began. Our Foreman, Troy, and his crew arrived at the home and began by inserting the PolyLevel underneath the driveway. After the PolyLevel was fully installed, the crew shifted their focus to filling the joints using the NexusPro Joint Sealant. Once the driveway was raised and fully repaired, the crew cleaned up their materials and left the home. The homeowner was relieved to know their driveway was properly repaired. American Waterworks is happy to assist in lifting and repairing our customer's driveways. 

A homeowner in Holcombe, WI, noticed that his sunken concrete walkway had caused the area to become bumpy and uneven. Knowing the issue would only worsen and that he needed expert advice, the homeowner began searching for "concrete lifting in Holcombe, WI" and found us. After looking through our website and becoming impressed by our reviews, the homeowner contacted us to schedule his FREE estimate. 

In about a week, our Design Specialist, Ross J., arrived at the home for the inspection, to look over the areas of concern, answer any questions, and provide the best solution for the homeowner. During the inspection, Ross explained to the homeowner that one of the most common causes of sinking slabs is soil washout. Soil washout is the process in which water moves through the ground and washes away the supporting soils of the slabs. Over time, gaps are created in the soil, causing the concrete slabs to sink. That is why Ross recommended PolyLevel, our waterproof foam expanding formula that allows for accurate lifting of sunken concrete, and NexusPro, our silicone-based sealant, to seal the joint where the step and slab meet. The homeowner happily agreed to Ross's recommendations, and his design was sent to our Foreman.

In a couple of months, our Foreman, Patrick B., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs. Then, PolyLevel is injected beneath the slab and fills the voids in the soil. Once the slab has been lifted to the desired height, the crew seals the holes. Lastly, they used NexusPro to seal the joint in front of the step. 

Now, our customer can have a smooth and level walkway! Have you noticed sunken slabs on your property? Click HERE to schedule your FREE estimate today!

In Holcombe, WI, a homeowner noticed sinking concrete around their home, causing areas to become uneven. Concerned that the issue would persist without a long-term solution, the homeowner began looking into concrete leveling services in the area and found us. Impressed by our reviews, the homeowner contacted us to schedule their FREE estimate.

In less than a week, our Design Specialist arrived at the home to provide a thorough inspection. During the inspection, they took precise measurements to see how far the slabs had sunken and determined the areas that needed lifting. After reporting their findings to the homeowner, they began working on a detailed solution. They recommended installing PolyLevel, our foam-expanding solution that is designed to lift sunken slabs. After reviewing the proposal, the homeowner decided to move forward with the project.

In about a month, our Foreman, Patrick B., and his crew arrived at the home for the installation. The crew began by drilling small holes into the slabs. Then, PolyLevel is injected beneath, filling in gaps in the soil. Once it has been raised to the desired height, the crew ensures it is level before sealing the holes.

Now, our customer can have peace of mind! Looking for concrete repair? Schedule your FREE estimate today by clicking HERE!