Before & After Photos

In Stillwater, MN a homeowner was looking to increase his curb appeal for the summer months. Specifically, he was looking to find a solution for the uneven joints and cracks scattered throughout the front walkway. He decided to go online to find a fix for the problem and searched for "concrete repair MN" to see what companies showed up. Sure enough, he found the American Waterworks website and quickly became interested in our FREE estimate offers. He decided to sign up for one and see what one of our experts had to say about his concrete situation. We sent over Design Specialist Mitch Strain to the home where he talked things over with the homeowner and inspected the walkway area for himself. Mitch decided that the best thing for the concrete was to install our PolyLevel, to lift and level the uneven slabs, and NexusPro, to seal in the unwanted cracks and large joints. The homeowner agreed to the plans and once they were approved, he was greeted by one of our Foremen, Dylon Mish, and his crew for the installations. When both products were installed and the crew had finished the work, they cleaned up the area and left the site. The homeowner was impressed with the results and grateful for the work that was done.

Interested in getting your concrete lifted? You know who to contact! American Waterworks can help get you started with a FREE estimate appointment.

A homeowner in Stillwater, MN was frustrated with the concrete apron outside of his garage. Over the years there were some cracks that formed, and the joints had started to separate. With the problems overall, he was interested in making a change to restore the space. He went online to look up crack contractors in Minnesota and found the American Waterworks website and our NexusPro crack repair sealant. He quickly became interested in the product and our services, so he signed up for a FREE no-obligation estimate with us. Our Design Specialist, Mitch Strain, went out to the home to inspect the concrete and prepare a solution plan for the homeowner. Mitch explained that our PolyLevel solution and NexusPro sealant installed together was the perfect way to restore the concrete apron. The homeowner agreed and was met by our Foreman, Dylon VanCanneyt, and his crew later to carry out the installations. The homeowner was very happy to have the cracks and joints sealed and to know that his concrete wouldn't sink and cause any more problems.

If you or someone you know is facing similar problems with your concrete, you know who to call! Get your FREE estimate with American Waterworks today!

A homeowner in Stillwater, MN, was growing frustrated with his concrete driveway. It had begun sinking, separating from the garage floor. This resulted in the homeowner having to step on the gas when entering the garage and then slamming on the brakes to not hit items within the garage. He began his research and came across our website. He decided to sign up for our FREE estimate, and a few weeks later, our Design Specialist headed out to the home. Once our Design Specialist completed his walkthrough, he informed the homeowner that his issues could be fixed by using our PolyLevel, a polyurethane foam that expands when it's injected below concrete slabs, slowly filling voids caused by soil erosion, and lifting the slab back to it's desired location. He finished by saying that our installation is completed with our NexusPro, a silicone-based sealant that gets applied to the cracks and joints of the concrete to prevent unwanted elements from getting beneath the slab. The homeowner agreed and work began a few weeks later. 

On the day of the project, our Foreman, Sam, made quick work of the installation. Now our homeowner can use their driveway without hassle!

Does your concrete need attention? Click HERE for your FREE estimate! 

A homeowner in Stillwater, MN, worried that their uneven and sinking garage apron was going to cause damage to their vehicle. Hoping to avoid total concrete replacement, the homeowner began looking into "concrete stabilization near Stillwater, MN". One of the first companies to grab their attention was us, American Waterworks, so the homeowner decided to go ahead and sign up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of our Design Specialist, Kyle. A few days later, Kyle promptly arrived at the home and began the thorough inspection. Once he completed the appointment, Kyle was able to confirm that the exterior concrete was suffering from settlement. To prevent the settlement from continuing, Kyle recommneded inserting PolyLevel below the sinking garage apron. Knowing this was the best plan of action, the homeowner agreed and worked with Kyle to find the best installation date. When the installation date arrived, our Foreman, Sam, and his crew traveled to the home to begin. First, Sam and his crew began by inserting PolyLevel underneath the sinking garage apron. Once the PolyLevel was inserted, the crew replaced the old joints with NexusPro, a silicone-based solution. Once all the products were secured, the crew cleaned up their matierals and left the home. American Waterworks is glad to help its customers repair their sinking and damaged concrete. 

A homeowner in Zumbro Falls, MN, was tired of dealing with a sunken driveway. It was continuously getting worse over time, and it had become a trip hazard for her and her husband. Knowing they needed an expert to provide them with a solution, the homeowner began looking into "concrete leveling companies near me". At the top of the search results was us, American Waterworks, so the homeowner decided to sign up for their FREE estimate. We sent one of our Design Specialists to their home to inspect the situation and design a solution for them. They were excited to hear that our PolyLevel concrete repair option is a durable, faster, and more affordable alternative to traditional concrete repair. They liked the proposal that Don developed for them, so they set a date for the installation.

Our PolyLevel crew drilled small holes throughout the concrete slabs that needed to be raised. Next, they injected the foam into the holes until the slabs were raised back to their original position. They covered up the holes with concrete and then sealed the cracks in the concrete with our Nexus Pro sealant. The entire process only took 3 hours, and the homeowner is able to enjoy level concrete for years to come. They are thrilled with the outcome and happy with how quick and non-invasive the project was. We are happy we were able to restore their peace of mind!

Do you have uneven concrete? Click here to receive a FREE estimate!