Before & After Photos

A homeowner in Rochester, MN, noticed that her walkway and driveway had begun settling, causing the area to become bumpy and uneven. Knowing the issue would not get better, the homeowner began searching for concrete repair in Rochester, MN, and found us. After browsing our website and becoming impressed by our concrete before and after photos, the homeowner knew we were the right contractor and contacted us to schedule her FREE estimate. 

In less than a week, our Design Specialist, Dustin L., arrived at the home to provide a thorough inspection of the homeowner's concerns. During the inspection, Dustin explained that soil compaction is the likely reason the homeowner's concrete has begun sinking. When a soil's load-bearing capacity exceeds, it causes the soil to compact and settle beneath the concrete. To fix this issue, Dustin recommended installing PolyLevel, our elite foam expanding solution that compacts the soil before lifting concrete slabs, and NexusPro, our silicone-based sealant to seal the joints. After reviewing the proposal, the homeowner agreed to Dustin's recommendations and decided to move forward with the project. 

In about two months, our Foreman, Troy J., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs and inserting the injection ports. PolyLevel is then injected beneath the slab, compacting the soil before lifting it. Once the slab had been lifted to the desired height, the crew moved on to install NexusPro. The crew applied NexusPro along the joints of the walkway and driveway, as well as repaired any cracks that had formed. 

Now, our customer can have a smooth and level walkway and driveway! Experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Rochester, MN, was concerned when she noticed that several of her concrete slabs along the driveway and walkway had begun sinking, causing the areas to become uneven. Knowing that the issue would not fix itself, the homeowner began searching for concrete repair in Rochester, MN, and found our website. After browsing our website and becoming impressed by our reviews, the homeowner grew confident in our abilities and scheduled her FREE concrete estimate. 

In less than a week, our Design Specialist, Mitch S, arrived at the home to conduct a thorough inspection of the homeowner's concerns. During the inspection, Mitch explained to the homeowner that soil compaction is the likely reason the homeowner is experiencing sinking slabs. When a soil's load-bearing capacity is exceeded, it causes the soil beneath the slab to compact and settle. To fix this issue, Mitch recommended our PolyLevel. PolyLevel is our foam-expanding solution that compacts the soil before lifting the slabs. It is a fast and effective method of lifting concrete without the troubles of mudjacking or slab replacement. After looking over Mitch's proposal, the homeowner happily agreed and decided to move forward with the project.

In a couple of weeks, our Foreman, Sam K., and his crew arrived for the installation. The crew lifted the walkway, the top of the driveway, and the slab along the driveway apron. After they successfully lifted them, they cleaned up their equipment and left the home.

Now, our customer can have a smooth walkway and driveway! Experiencing sunken concrete? Click HERE to schedule your FREE estimate today!

A homeowner in Rochester, MN, had noticed that the concrete around their walkway and driveway had begun sinking, causing the area to become uneven and bumpy. Knowing the issue would worsen, the homeowner contacted us to schedule their FREE estimate. 

In less than a week, our Design Specialist, Brad W., arrived at the home to conduct a thorough inspection of the concrete. During the inspection, he took a close look at the areas where it was a trip hazard and the concrete began sinking. He then created a proposal recommending PolyLevel, our foam solution, to lift the slabs back up, and NexusPro, to seal the joint along the side garage door. The homeowner happily agreed to the recommendations and decided to move forward with the project.

In a couple of months, our Foreman, Dylon V., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs. Next, PolyLevel is injected beneath the slab, lifting it. Once it has been lifted to the desired height, the crew seals the holes and applies NexusPro.

Now, our customer can have a smooth and level driveway and walkway! Noticed sinking slabs around your home? Click HERE to schedule your FREE estimate today!

A homeowner in Rochester, MN, had noticed their steps had begun sinking, causing a gap to be seen where the step and wall meet. Concerned for its stability, the homeowner contacted us to schedule their FREE concrete estimate. 
In less than a week, our Design Specialist, Ross J., arrived at the home to conduct a thorough inspection of the concrete. During the inspection, Ross took measurements to see how far the slabs had sunken. After reporting his findings to the homeowner, he created a proposal recommending lifting the slabs with PolyLevel, our foam expanding solution. Along with PolyLevel, Ross also recommended sealing the joints with NexusPro, our silicone-based sealant. After looking over the proposal, the homeowner happily agreed.

In a couple of months, our Foreman, Dylon V., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs. Next, PolyLevel is injected beneath the slab, lifting it to its original position. Lastly, NexusPro was applied along the joints. 

Now, our customer can have peace of mind knowing their concrete issues have been fixed! Experiencing sinking concrete? Click HERE to schedule your FREE estimate today!

A homeowner in Rochester, MN, knew it was time to repair their sinking steps. Hoping to avoid total concrete replacement, the homeowner began looking for a company that provided concrete lifting services. Luckily for the homeowner, they didn't need to look far, since one of the best concrete repair services was in their area, American Waterworks. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Ross. A few days later, Ross traveled to the home to begin the inspection. During his inspection, Ross found several areas that were suffering from settlement. To avoid the settlement from continuing, Ross recommended lifting the steps with PolyLevel, a polyurthane foam injection solution. Knowing this was the best plan of action, the homeowner agreed and worked with Ross to find the best installation date. When the installation date arrived, our Foreman, Dylon, traveled to the home to begin the installation. First, Dylon and his crew inserted the PolyLevel below the sinking steps. Once the steps were lifted, Dylon and his crew installed NexusPro, a silicone-based solution, along the damaged joints. After all the products were secured, the crew cleaned up their materials and left the home. The homeowner was grateful for the excellent work completed by the crew. American Waterworks is happy to repair its customers' damaged stairs.