Before & After Photos

This homeowner in Westland, Michigan contacted HomeSpec to repair a driveway slab and some garage slabs that were cracked and sinking. 

Foreman Devin Parker used the PolyLevel method to repair the concrete. The high-density rigid foam is first injected below the slab through smalls holes. As it expands, the slab is lifted and leveled. This material is stable and strong, and environmentally safe. 

The homeowner was able to use his driveway and garage again that same day, and was happy to find a permanent solution for his concrete issues! 

This clear safety hazard of shifting, settling, and sinking concrete slabs would be leveled and sealed using a combination of PolyLevel to inject a powerful versatile polyurethane foam underneath to lift the slabs back into place, and NexusPro joint sealant to reliably seal in the gaps with UV resistant and weatherproof material.

A cracked front sidewalk leading to the entrance of a home in Westland, Mi consisted of cracked unleveled slabs. We were able to easily rectify the problem with a combination of injecting high-power polyurethane foam to help lift and level slabs, and sealing joints with our NexusPro system; a proven waterproof and UV-resistant seal 

These homeowners in Canton, MI were concerned about their uneven driveway. They worried about the trip hazard not only for themselves but for friends and family. Another point that led them to want repairs was disliking the sunken appearance of their new home. They called HomeSpec Waterproofing and Foundation Repair for an inspection. The project manager, Noah, did a walk-around with the homeowners to gauge the scenario. His suggestion to lift the concrete and seal the joints aligned with the homeowners’ vision and a HomeSpec crew was then scheduled for the repairs.

The PolyLevel foreman, Fred, led the crew in this concrete leveling service. They drilled holes into the sunken slabs and then used the PolyLevel® injection foam to lift the concrete until it was level with the other slabs. After ensuring the driveway was properly leveled, the team sealed the joints using NexusPro to offer a clean final look and protect the driveway.

A homeowner in Canton, MI noticed that over the last year, their driveway had more cracks than ever before. They wanted to seal these cracks and raise areas of the concrete that had sunk over time. Ideally, the driveway would be protected from cracks in the future, too. They plan to be in this home for the next ten years, until their child graduates. The homeowner called HomeSpec Waterproofing and Foundation Repair for a free estimate.

Noah, a project manager for HomeSpec, went out to the home and inspected the driveway. He explained to the homeowner that this did align with HomeSpec’s repair plan and how the work would be completed. First, the team would cut through the plants growing in between the concrete. Then, where the concrete needed to be lifted, small holes would be drilled through to the other side. These holes would allow the foreman to use PolyLevel® Injection Foam to lift the concrete back into place. Finally, the joints would be sealed using NexusPro sealant. This would secure the driveway and provide a clean aesthetic. The homeowner agreed to this plan and had HomeSpec’s PolyLevel foreman, Domonique, and his team move forward with the repairs. They were very happy with the finished product!