Before & After Photos

A slab of concrete connecting the driveway to the sidewalk was sinking, causing a large step to appear. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the driveway and restore peace of mind for years to come!

A concrete slab was settling near steps leading up to a house in Saint Louis, MO, causing it to sink and crack. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. This will improve the safety of the concrete and restore peace of mind for years to come!

A patio was sinking in Saint Louis, MO, causing the slabs to become uneven and a tripping hazard. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

A sidewalk around a pool was sinking in Des Peres, MO. The slabs of this sidewalk were becoming uneven, jeopardizing its safety. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This swill improve the safety of the sidewalk for years to come!

Howard of St. Louis, Missouri had a sinking foundation in his garage that prevented the door from closing properly, so he decided to call Woods Basement Systems for a solution. Systems design specialist, Bill F. recommended installing PolyLevel. 

Foreman, Mason S. installed the product. PolyLevel is a polyurethane formula used to permanently lift and stabilize sinking concrete slabs. First, small holes are drilled into the concrete, then the polymer is injected into the void and cement covers the holes. Within 15 minutes of installation, the concrete can be used again. 

Now Howard S. can safely use his garage.