Before & After Photos

Mildred H.'s Wappapello, Missouri driveway was settlilng unevenly and had cracks. She contacted Woods Basement Systems to determine the issue and a proper solution.

Our design specialist determined that the PolyLevel concrete leveling system as well as a downspout extension would solve the soil-washout issue. 

The picture of the driveway before we completed the installation shows the cracks and uneven concrete. The after picture shows the driveway concrete even as well as the cracks filled and sealed.

This Florissant, Missouri homeowner called Woods Basement Systems for help with her back patio. Over the years, much of the underlying soil had washed away in storms, causing the concrete slabs to sink and crack under their own weight. In order to repair the damage, a Woods team injected PolyLevel, an expanding composite foam, underneath the sunken slabs to lift them and fill in the cracks. Because PolyLevel is quick-drying, the patio was ready to be used in just 30 minutes!

This homeowner's driveway was cracked, uneven, and sinking. This would only get worse if left untreated, so the PolyLevel system was installed. It's injected through pea-sized holes underneath the concrete slabs to lift and level them. This will fill cracks over time, along with the help from NexusPro sealant. Now this driveway is level, even, and no longer a tripping hazard.

A concrete driveway was sinking in Florissant, MO, causing the slabs to become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the driveway and restore peace of mind for years to come!

A driveway was sinking in Florissant, MO, causing the slabs to become uneven and crack. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the driveway and restore peace of mind for years to come!