Before & After Photos

This homeowner was ready to remodel the upstairs of her home, when she noticed that all the floors were sloping towards the middle of the home. She recognized that something was wrong and unstable about her home, so she wanted to fix this issue before remodeling. She gave us a call to have an inspection done on her home.

We sent System Design Specialist Anthony Salcedo to inspect the foundation and give the customer a comprehensive explanation of the problem. Anthony noticed that the floors were sagging due to an interior support beam that was sloping significantly due to a lack of support posts. Anthony and his team knew just what to do, so they began work right away when the customer decided on the solution she would move forward with. The team removed both existing posts and began drilling two helical soil nails deep into the earth. The Helical Piers System can support our SmartJacks, which were then installed so that the home's support beam now has proper support posts that run deep into the earth. 

The homeowner was very impressed with the whole process and the installation. Check out her home's new support system!

This customer has lived in her home for quite a while, but recently she's noticed one of her basement walls start to crumble. She's concerned that if it isn't fixed soon the wall could completely fail. The home was built a long time ago and likely had a crawlspace foundation. At some point they dug out the crawlspace and made room for storage and for the HVAC and water heater. Rather than installing a proper concrete wall, they put a concrete skim coating over the dirt wall that was dug out. Over time the pressure of the soil caused the concrete to fail. To repair the wall we used two Smartjack XT to support the floor above, and EverBrace to reinforce the basement wall to prevent any further degradation. 

These homeowners recently bought their home and planned to start remodeling it soon. Before their remodel however, they noticed that there were unlevel floors on the second floor. Wanting to ensure that everything would go well with the remodel, they called us.

We sent System Design Specialist Anthony Salcedo to inspect the upstairs floors and determine what the cause of this issue was. Anthony sound that the support beam in the basement has sinking issues and that the floor had heave issues. He found the root cause of this problem to be that the support posts holding up the support beam was failing and needed to be replaced. Anthony and his team got right to work after discussing with the homeowners the best course of action. The team installed SmartJacks and expansion joints to support the basement support beam and ensure that the posts would not move even if the support beam were to heave or sink. This combats the sinking problem, so that the upstairs floor will remain level in the future.

The homeowners were happy with the outcome and the look of them. They can't wait to proceed with their remodel. Check out their support beam lift!

Jeremy met the Thrasher team at a home show a few months ago. He was interested in purchasing a home but knew it had structural issues. He wanted a professional team to look at the house to figure out what was needed to achieve stabilization for the house to pass inspection. 

We sent Anthony Salcedo to the home to look at the foundation. He found that an area of the foundation was settling about an inch into the soil. Anthony knew we needed to develop a solution quickly because Jeremy had a small window before closing on the house. 

Our install team was able to lift the house about an inch (to its original position) and close most cracks in the walls by installing helical piers. Helical piers are made of heavy-duty galvanized steel that's resistant to bending. They are advanced or screwed into the soil and support the structure's weight.

Jeremy was very grateful throughout the entire process and impressed with our level of professionalism and execution. Above all else, he was happy we were able to work with him on his schedule and close on his new house in time!

These homeowners recently purchased their home for their kids and grandkids to live in, however they had some concerns with the foundation and needed to get it fixed. After looking into companies that do foundation repair, they reached out to us for a free estimate.

We sent System Design Specialist Rob Griffin to inspect the home's foundation to determine what was causing the foundation concern. Rob found that the fireplace was pulling away from the house, creating a gap between the outside wall and the chimney. He also saw that the garage was sinking because of weak fill soil that could not hold the weight of these structures. After thoroughly understanding the problem, Rob talked to the homeowners about options to solve this, and they loved how he described the options, so they decided to move forward with us. Our team installed Push Piers to stabilize the home and they were able to fix the problem by leveling the chimney and home.

The homeowners were very happy with the quality of work the crew did on their home. Check out the leveled chimney and home!