Before & After Photos

This customer was getting ready to sell her house and didn't want water damage to prevent the sale. So she called Thrasher to come out and inspect her home. Upon inspection, we found that the home's foundation had a lot of damage with moisture, broken walls, and sagging beams. To fix these issues, we installed WaterGuard, a full wall of CleanSpace, and installed a TripleSafe sump pump to control water. We swapped some anchor plates under warranty, we added new PowerBraces to another wall for more support. And we also added supplemental beams and Smart Jacks to support failing beams and sagging joists.

The customer was very happy with how everything turned out and relieved she didn't have to worry about these issues anymore.

This homeowner was worried that the cracks in the concrete on her patio would cause problems sooner or later. It's a good thing she called us because sinking concrete can create many issues including its structural stability. We used PolyLevel to even out the concrete slabs, and then we caulked the joints with NexusPro. 

Look at the new look this driveway got! The joints around this driveway were left exposed causing concerns for future damages to the concrete and not giving the look this homeowner wanted. After using NexusPro joint sealant to seal and protect those joints, this driveway is now protected and was given a whole new look. 

This customer had some sinking slabs on their driveway. Concrete slabs can sink because of soil erosion or settlement beneath the slab which leads to voids or weak areas that cause the concrete to lose support and sink into the ground. Also, things like poor installation or inadequate support beneath the slabs can also cause them to sink over time. 

In this case, we found that water eroding the soil was the cause. We fixed it using polylevel foam to lift and level them and then sealing the concrete with NexusPro to make sure water couldn't cause the same problems in the future. 

This homeowner noticed some water seeping through the cold joint and did not want to start having water damage. They attempted a quick fix of grading, landscaping, and outdoor waterproofing, but as soon as it happened again, they knew they needed something else to fix it. They knew of Thrasher and knew they could trust us to provide them with a permanent solution. They knew the quality would be worth the cost and that it would be done right the first time. One of our System Design Specialists, Tony, found water had penetrated the basement through the cold joints, just as the homeowner thought. Although they fixed what they could on the outside, water was still seeping through. After looking into options, we proposed to do CleanSpace on the walls, and WaterGuard in the same area on the ground. CleanSpace is our plastic, waterproof seal that is applied to the walls. It will collect any water that is coming through the cold joints, as well as any water from the block walls that may seep through. This will trickle down to our WaterGuard system, that will direct the water to a sump pump, to push it out and away from the home. The homeowner was very pleased with how everything was installed and how it looks! She gave compliments to the crew, and knew she would have peace of mind not having to worry about the water again.