Before & After Photos

A house with foundation settlement issues in Farmington, Missouri started getting cracks in the exterior walls that needed repaired. To resolve this issue, Woods installed The Push Pier System to permanently stabilize the foundation. The Push Pier System consists of hydraulically driven steel tube sections that are driven past unstable topsoils to the sturdy bedrock beneath it. This helped stabilize the foundation and resolve the cracks forming on the exterior walls.

Crystal City, Missouri homeowner Rachel W. was stressed about her bowing basement walls. As the basement walls bowed, they began to crack. Her foundation was at risk and water was entering her basement. 

Foreman Todd W. installed the Geo-Lock wall anchors to restore her foundation walls to their original position and provide support for her home. Geo-Lock is a permanent solution to bowing basement walls.

A support post was crumbling in a basement in Elsah, IL, causing issues with the foundation. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the basement and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This basement will now remain stable and restore peace of mind for years to come!

A foundation was settling in Florissant, MO, causing cracks to appear near the doors. To solve this issue, the Push Pier System was installed. These will permanently stabilize the foundation, and in many cases, lift it back toward its original position. These can also close cracks and improve the operation of windows and doors. This is the least risky solution when the soil conditions are unknown. There is minimal disturbance from installation; installing them is a quick process and will solve the problem once and for all!

A basement was becoming unstable in Florissant, MO, causing concern. To solve this issue, the SmartJack System was installed. These steel support systems can permanently stabilize and level the floor joists and girders in the basement. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. These will lift the floors above back toward their original position, reduce floor “bounce” caused by excessive joist spans, and solve the problem once and for all!